Click to enlarge |
Complete kit consists of:-
Special Racing Brake patented Bigger Drilled and Grooved Front 332mm x 24mm light weight two piece “race proven” discs that will not only disperse heat better, but also reduce the hub assembly’s unsprung weight allowing the suspension to perform better.
-
Special Racing Brake patented Drilled and Grooved rear light weight two piece “race proven” discs.
-
Pair of big Racing Brake four piston front brake Callipers to replace the original Mazda single piston calliper, available in either red or black
-
Complete set of Racing Brake Aggressive Street ET500 Front and Rear Brake pads, (race pads may be added at extra cost)
-
Pair of brackets with bolts to enable the front calliper conversion described above.
-
Set of front and rear Racing Brake braided brake lines
-
Special R600 Brake fluid as used in vehicles up to GP2
For details of the callipers, please click here
Please select your choice of caliper colour from below
This is a direct D.I.Y bolt-on conversion with only a very small modification required to the tin back-plate to accommodate the new calliper bracket also very rarely some aftermarket wheels may require a small spacer to clear the calliper, but this is very very rare. Also if this kit is for a PZ or R3 RX-8 a 10mm spacer is required.
RX-8 & R3 Complete big front and rear brake upgrade kit with lightweight race spec two piece brake discs
Complete “Race” brake package upgrade that will not only reduce your braking distances tremendously but also look great behind those big 18" wheels
| PLS SELECT CALIPER COLOUR | |
|
.jpg)
