MAZDA RX8 > ENTER THE RX8 PARTS STORE

Products

Genuine Mazda Apex seals, six are required for a set.
£352.00  (Inc VAT £422.4)
 
Price quoted is for 2 stationary gear bearings .
£101.20  (Inc VAT £121.44)
 
Genuine Mazda RX8 Rotor Bearing x1
£39.05  (Inc VAT £46.86)
 
Genuine Mazda Water Seal Kit which would cost 225inc vat from a Mazda dealer , includes all the seals to bolt the Rotary Engine block together.
£187.00  (Inc VAT £224.4)
 
As suggested this is a more comprehensive rebuild kit than the previous kit for high mileage engines or engines with issues other than just loss of compression.
£1017.50  (Inc VAT £1221)
 
New Mazda RX-8 Rotor Housings avaliable to order for 600 plus vat each instead of the dealer 719.02 plus vat each saving 142.82 per housing when Vat is added
£874.50  (Inc VAT £1049.4)
 
04-08 RX-8 Uprated Oil Pressure Regulator - 90-95 PSI plus Thermal Bypass Pellet Replacement kit so you know the oil is properly getting to the places it should all around the engine.
£105.05  (Inc VAT £126.06)
 
Invaluable for disassembling and reassembling all RX-8 engines
£27.50  (Inc VAT £33)
 
As appointed UK distributor for Goopy Performance we are now able to offer a proven more durable than stock direct replacement Apex seal for the RX-8 at a price less than you would pay for a stock Apex seal from a Mazda dealer.
£324.50  (Inc VAT £389.4)
 
Apex seal spring set consists of 6 short and 6 long springs
£66.00  (Inc VAT £79.2)
 
Genuine Mazda RX-8 & R3 Side Seal set (12 in a set)
£264.00  (Inc VAT £316.8)
 
Genuine Mazda RX-8 & R3 Side Seal Spring set(12 in a set)
£55.00  (Inc VAT £66)
 
Genuine Mazda Corner Seal plug set (12)
£35.20  (Inc VAT £42.24)
 
Genuine Mazda Corner Seal set (12)
£162.64  (Inc VAT £195.17)
 
Genuine Mazda RX-8 & R3 Corner Seal plug set (12)
£37.40  (Inc VAT £44.88)
 
Rotor Oil control ring set
£44.00  (Inc VAT £52.8)
 
Stationary gear O ring
£5.50  (Inc VAT £6.6)
 
Front Cover oil seal
£15.95  (Inc VAT £19.14)
 
Genuine Mazda Rear main oil seal
£13.75  (Inc VAT £16.5)
 
The Racing Beat S-Port Templates allow you to undertake your own porting efforts on all model years of the Renesis 13B engine
£105.88  (Inc VAT £127.06)
 
This kit is for engines that are taken apart and it is found that the only discernable wear has happened to the Rotor Apex seals that normally are found to have worn to around half the depth they should be, accounting for low compression.
£550.00  (Inc VAT £660)